Indoor and Park Flyers

Overview

The Ultimate Fx offers 3D flying at its most extreme. It features a resilient vacuum-formed fuselage, which is stronger than profile foam and has a lot less flex. This not only gives more precise control but it also enables the Ultimate to fly better in slightly windier conditions. Carbon fibre support stiffeners and blade spar with interlocking wing configuration provide reinforcement and added strength when flying in windier conditions. This makes for a very A high visibility factory painted trim scheme, lightweight fibreglass cowl and formed wheel spats give the Ultimate great looks to match its extreme performance, and the reinforced flat foam wings have ailerons on both the top and bottom wings giving the Ultimate an extreme roll rate and excellent aerobatic performance. With an assembly time of just four to six hours the Ultimate FX represents outstanding value, and it’s the obvious choice for pilots wishing to take their electric flying to the very limit! Durable enough for outdoor flying, yet light enough for indoor flight

Features

Extreme 3D aerobatic performanceDurable vacuum-formed foam fuselage Carbon fibre stiffeners and blade sparAttractive factory applied paint schemeLightweight fibreglass cowlPre-formed wheel spatsHardware pack included (wheels, links, etc)
Comprehensive assembly guideInterlocking wing configurationTinted canopy

Specifications

Wingspan: 710mm (28inches) Length: 790mm (31inches) Weight: 410-470gm (14.5-16.5ounces) Motor: Park 370 Inrunner or Park 400 Outrunner Radio 4channel with 3 sub-micro servos Speed control: 20-amp brushless Prop size: 12 x 6 (included) for inrunner or 10 x 4.7 - 11 x 4.7 with Outrunner Gear Ratio: 6.6:1, 0.4 Module (66T spur with 10T pinion) gearbox (included) CG (center of gravity): 3-1/2 in (90mm) to 4 in (100mm) behind the leading edge of upper wing Hardware Included: Yes Recommended Battery: 11.1V 1200-1320mAh Li-Po Approx. Assembly Time: 4 - 6 hours