Skip to main content
MPX Kit Easyglider ProDiscontinued - Please call for alternative.
Click to enlarge

Multiplex MPX Kit Easyglider Pro

Discontinued - Please call for alternative.

Stock code 25214226

Multiplex

£86.90

The logical development – for directdrive brushless motor

The EasyGlider PRO is based on the popular and proven Easy-Glider and EasyGlider electric.
The EasyGlider PRO is designed for brushless outrunner motors and LiPo batteries, and a matching power set is available under # 33 2636 or - if you want a little more "oomph” - the upgrade power set # 33 2642. However, the model can also be built as a pure glider: the kit includes a fuselage nose-cone in which our aero-tow mechanism # 72 3470 can be installed.
The model’s flying characteristics are just right for the beginner, although this by no means implies that the more advanced pilot won’t enjoy it - quite the contrary. If you are an expert you will soon discover that the EasyGlider PRO behaves like a much bigger model, and its performance is also far better than you might expect.

Kit contents: Moulded ELAPOR® parts, GRP spar, all plastic parts required to assemble the model, small items, linkage components, decal sheet, comprehensive, richly illustrated instructions.

  • Low sink rate
  • Can be ballasted to expand the airspeed range
  • Landing aid - both ailerons raised
  • Can be fi nished using any standard spray-can paints after prior treatment with MULTIprimer # 60 2700
  • Pre-fabricated moulded ELAPOR® parts
  • Convenient method of aileron servo connection when the wings are fitted

The EasyGlider PRO is based on the popular and proven Easy-Glider
Landing aid - both ailerons raised
Pre-fabricated moulded ELAPOR parts includes a fuselage nose-cone in which our aero-tow mechanism
The EasyGlider PRO is designed for brushless outrunner motors
The model can also be built as a pure glider
The EasyGlider PRO behaves like a much bigger model

 

Wingspan:1800 mm
Overall length:1130 mm
All-up weight, glider version:approx. 800 g
All-up weight, electric version:approx. 900 - 980 g
Total surface area:41.6 dm²
Wing loading:17 g/dm²
Wing loading with ballast, max. 350 g:approx. 25 g/dm² (e.g. for slope-soaring or flying in wind)
RC functions:Rudder, elevator