Skip to main content
T-REX 450LP ARTF (DC) RH45E32XW RH45E33XTLow Stock – Available for despatch normally Mon-Fri if ordered before 2pm, We will contact you if unavailable.
Click to enlarge

T-REX 450LP ARTF (DC) RH45E32XW RH45E33XT

Low Stock – Available for despatch normally Mon-Fri
if ordered before 2pm,
We will contact you if unavailable.

Stock code RH45E32XW RH45E33XT

Align

RRP £480.00 £479.99
 

T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts and solve the problem of assembly and adjustment, Align introduced the T-REX 450LP ARTF (Almost Ready to Fly). Completed with Align A10 transmitter and newly released Mini GRS flybarless system, just easy to experience the fun fly enjoyment.

The helicopter utilizes DFC rotor, paired with Mini GRS flybarless system optimized for T-REX 450LP flight characteristics. Without any adjustment or tuning, this combo will be provided optimal stability suitable for pilot of all levels.

Equipped with newly digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with newly RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.

The ALIGN A10 features AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The transmitter features a comfortable ergonomic design allowing for much easier and smoother control. Completed with the function different aircraft modes (helicopter / aircraft / multicopter).The Logical and simple control interface, Make it easy to set up.

With the addition of the brand new A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the performance limitation of generic flybar helicopters, improving both stability and 3D performance, while maintaining a down to earth price level.

( Please note that the Charger included is a DC Charger, and will require a 12v power supply to run)

T-REX 450LP Specification

  • Length: 705mm

  • Height 205mm

  • Width: 110mm

  • Main Blade Length: 325mm

  • Main Rotor Diameter: 734mm

  • Tail Rotor Diameter: 171mm

  • Motor Drive Gear: 11T

  • Main Drive Gear: 121T

  • Autorotation Tail Drive Gear: 106T

  • Tail Drive Gear: 26T

  • Drive Gear Ratio: 11:1:4.07

  • Weight (W/O Battery): 730g

Standard Equipment

  • A10 Transmitter Transmitter x 1

  • A6B Receiver x 1

  • RCE-BL45P ESC x 1

  • 460MX Brushlessmotor (3200KV/2222) x1

  • DS450 Digital Servos x 3

  • DS455 Digital Servo x 1

  • MINIGRS Flybarless System x 1

  • Balance Charger RCC-3SX x 1

  • 3S1P 11.1V 2200mAh/30C Battery x 1