Skip to main content

Tamiya 58636 RC TA07 PRO Chassis Kit

58636 RC TA07 PRO Chassis Kit


Click to enlarge

Tamiya 58636 RC TA07 PRO Chassis Kit

Stock code 58636

Brand  Tamiya

Discontinued - Please call for alternative.
RRP £225.00 £199.99

This 4WD R/C touring car chassis assembly kit is based around a composite structure that consists of a narrow lower deck and an upper frame. The part design layout provides the chassis optimal torsional rigidity which can be further adjusted by removing the frame center section. The highly efficient single belt drivetrain offers 3 motor position locations, each with its own performance characteristics suited to different tracks and setups. Proven TRF419 design suspension, gear differential units and steering components are joined by proven TRF aluminum shock dampers and universal shafts to make this chassis a hi-spec racer!

  • TRF419 design Uprights
  • TRF419 design Suspension Arms
  • TRF419 design Gear Differential Units
  • TRF Dampers
  • Universal Drive Shafts

Further Details from Tamiya's Design Team:

The upper frame allows for a symmetrical chassis design, which in turn helps to optimize chassis flex. Note: that front/rear stiffener, and center brace parts are attached separately to the integrated lower and side frame piece.

The efficient single belt winds back around the main and counter pulleys. Using one belt as opposed to two facilitates the changeable motor position feature. It allows simple reconstruction of the chassis using the existing belt rather than many different lengths.

The 3 motor positions cover a total range of 52mm. Changing motor positions is easy; just take off the cover, remove 2 screws, and re-attach the motor mount in the desired position.

TRF419 suspension parts and gear differentials give top-level performance and reliability. Like on the TRF419, the servo mount is attached on one side only, with chassis flex in mind. The battery can be removed via the chassis side.

Product Specifications (Specifications subject to change)

Type Detail
Scale 1/10
Construction type Assembly kit
Terrain use On-Road
Drive-train 4WD
Drive type Belt
Drive line Universal
Differential type Sealed oil-filled gear
Suspension Fully independent double wishbone
Steering mechanism Bell-crank
Shock damper Oil-filled damper
Shock damper material Aluminum
Tire type Not included
Tire tread N/A
Body material Not included
Chassis material FRP (Fiber Reinforced Plastic)
Electronic Speed Control (ESC) Not included
ESC model N/A
LED Light buckets No
LED lights No
Motor N/A
Bearings Shielded ball bearing
Adjustable camber Yes
Adjustable toe angles Front and rear
Adjustable ground clearance Yes
Adjustable gear ratio Yes
Adjustable wheelbase Yes
Adjustable track width Yes
Adjustable shock angle Yes
Special feature 1 Uses a composite lower deck/upper frame setup, as opposed to the TA06's monocoque. Lower deck and side frame parts are integrated, while upper frame center brace and F/R stiffener parts are separate.
Special feature 2 Slim line lower deck piece features a skid-shaped underside to minimize contact with the track surface.
Special feature 3 Single belt-driven 4WD provides efficient acceleration.
Special feature 4 Drivetrain utilizes 8 ball bearings.
Special feature 5 The motor can be switched between one of three positions, each with its own performance characteristics.
Special feature 6 Utilizes race-proven TRF419 suspension, steering parts (same Ackerman geometry) and gear diff units.
Special feature 7 Includes universal drive shafts, adjustable battery holder and TRF dampers.
Special feature 8 Battery is inserted from chassis side.
Requires A 2-channel radio gear
Requires B 7.2 battery & charger
Requires C Tires, body set, motor, esc
Requires D Polycarbonate Paint

Related Products

RRP £40.00 £34.99

Out Of Stock

Fusion NX86 AC/DC NiMH Charger

Out Of Stock

Fusion NX84 Sprint AC

In Stock

Carson Reflex Stick Pro 31 2Ch Radio Set 24GHz
RRP £50.00 £44.99

Out Of Stock