Stock Code 63 SAND 14ml
Humbrol
£1.60Delivery time: 1-3 working days |
A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealedhardboard and more (always check on a small test area to check suitability).
Application
Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry.
Drying Time
Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night).
Coverage
A 14ml tinlet covers approx 0.3m2 depending on thickness of application.
How to CleanBrushes:
Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is perminant once dry.
Horsa Glider 1:72Stock Code A05036 A05036. The Horsa was the primary glider used in the paratrooper landings at both D-Day in June 1944 and Arnhem in September 1944. The Horsa was made up of thirty separate parts primarily made out of wood. This allowed production to be subcontracted out, with some parts being made by furniture manufacturers! In all, over 3,700 were built. The Horsa I was designed to carry 25 soldiers while the Horsa II had a hinged nose and carried vehicles and guns.
|  Mirage F.1 1:72Stock Code A04022 A04022. Dassault designed the Mirage F1 as the successor to its Mirage III and Mirage 5 fighters. Unlike its predecessors, it has a swept wing mounted high on the fuselage, as well as a conventional tail surface. Although it has a smaller wingspan than the Mirage III, the F1 nevertheless proved to be clearly superior to its predecessor. It can carry up to 40% more fuel, has a shorter take-off run, a superior range in lo-lo missions, and better manoeuvrability.
| ||||
 Tiger I Tank 1:76Stock Code A01308 A01308. Introduced to German tank units in 1942, the Tiger I was the most powerful tank at that time and remained so for almost three years.
|  Cutty SarkStock Code A09253 A09253. A "cutty sark" is a short chemise. It comes from a poem by Robbie Burns, Tam O'Shanter, when Tam, a young lad sees some witches dancing in the wood, ne of whom is wearing a very revealing Cutty Sark. The Cutty Sark, built in Dumbarton is the best known of all the clippers and in her hey-day was the fastest of them all. She could carry 32,000 square feet of sail giving her a maximum speed of over 17 knots. Employed in the tea trade, she was used to speed the new seasons crop from China to London where the crews hoped to gain the prestige of being the first back. Since 1957 she has been in dry-dock in Greenwich, London, attracting visitors from all around the world. This much loved ship was almost destroyed by fire on May 21st 2007.
| ||||
 WasaStock Code A09256 A09256. The Wasa gained it's fame throught the fact that in 1628 it disastrously keeled over and sank in Stockholm harbour, at the start of its maiden voyage. It was one of four ships built at the time to strengthen the Swedish Navy and help to defend Sweden from potential invasion plans. She was raised in 1961, approx 333 years later and is now on display in a permanent restoration site in Stockholm which is open to visitors.
|
