Arrows Hobby J3 Cub PNP (1100mm)
Stock code ARR003PBrand Arrows Hobby
Arrows Hobby J3 Cub PNP
Talk about icons of the air! Where civil light aircraft are concerned they don't get more symbolic than Piper's flat-4 powered small field runabout, The J-3 Cub. Produced in huge numbers and seen in various colour schemes, not least standard Cub Yellow, this convenient size 1030mm span model is arguably one of the prettiest with its scale blue sunburst scheme. Those who appreciate fine detail will delight in the attention that's been levelled on making this four-channel model look the part for not only does it feature a crisp Continental engine complete with cooling baffles, exhaust detail and oil cooler, there's a neatly appointed cockpit, scale undercarriage and wheels, plus main struts, jury struts and even rivet detail.
Powered by a cheap ‘n' cheerful 1200mAh 2S 7.4v LiPo (not supplied) and requiring only a basic four channel transmitter and receiver to complete, this eye-catching example of the breed looks fabulous in the air and suits anyone from experienced beginner to expert. Flown in a representative manner – circuits, bumps and gentle cruising – it really will give you the authentic Cub experience and, of course, it'll sit on the back seat of the car fully rigged which makes it massively convenient. What more could you want!
(See below for recommended items required to complete)
- 3015 1700KV brushless motor and 20A ESC
- High power-to-weight ratio
- Suits standard 2S 7.4V 1200 – 1500mAh 20C LiPo
- Oversized battery compartment to suit various battery sizes and capacities
- Four pre-installed high quality servos
- Highly durable EPO foam construction airframe
- 30 minute assembly time
- Water-based paint
- Superb scale detailing
- Only a basic 4-channel radio is required
- Quality hardware
- Ball joint control linkages
What's in the Box
- 1x Factory assembled and painted fuselage with decals applied
- 1x Factory assembled and painted 1-piece wing with struts attached
- 1x Factory assembled and painted tailplane halves
- 1x Pre-installed 3015 1700KV motor
- 1x Pre-installed 20A ESC with JST connector
- 4x Pre-installed high quality servos
- 1x Scale undercarriage and wheels
- 1x 8 x 4.5" 2-blade propeller
- 1x Screw and pushrod set
- 1x Comprehensive instruction manual
Needed to Complete
- 4 channel transmitter and receiver combo
- 2S 7.4v 1200 – 1500mAh LiPo with JST connector
- 2S compatible LiPo balance charger