Skip to main content
 

FMS YAK 130 EDF 70MM V2 ARTF w/o TX/RX/BATT

FMS YAK 130 EDF 70MM V2 ARTF w/o TX/RX/BATT

Pre-Order, Expected 31 May 2021

Click to enlarge

FMS YAK 130 EDF 70MM V2 ARTF w/o TX/RX/BATT

Stock code FMS108P

Brand  FMS

  Pre-Order, Expected 31 May 2021
RRP £329.99 £296.99
 

Committed to the design and production of cutting-edge scale model aircraft, FMS has dedicated an extraordinary amount of effort in the design of the Yak 130 V2 to ensure that it'll also be at the pinnacle of model aviation. Finding a balance between scale and performance has always been a challenge, it took numerous prototypes, test flights and modifications to refine the Yak 130 V2 into its final form. FMS is confident that this is the most accurately defined Yak on the market today.

Small details such as the plastic leading edge of the air intake, which reduces turbulent airflow and protects the air duct from debris, are implemented onto the airframe. The panel lines, cockpit interior, scale pilot and even the auxiliary fuel tanks are made with significant attention to detail. Even the way the aircraft is assembled has been optimized- with a screw-together airframe, it's now possible to build the Yak 130 V2 in the time it takes to charge the flight battery.

Utilizing the FMS 70mm 12-bladed EDF unit, Predator 2860-1850KV motor and an upgraded 80A ESC, the Yak 130 V2 has more than enough thrust totackle the most demanding of manoeuvres. A Strong upgraded metal landing gear set provides added support and strength to absorb the impact of less-than-perfect landings. All servos are pre-mounted and are optimized for this aircraft, ensuring absolute reliability and manoeuvrability.

Don't settle for any less than the best- FMS Yak 130 V2


FMS YAK 130 V2

Features

  • Upgraded and detailed metal landing gear set for added support and strength
  • Metal-geared servos for precise and accurate control surface movements
  • Scale details - pilot figure, auxiliary fuel tank, retractable landing gear and flaps
  • Retractable landing gear system
  • Fully functional flaps, ball-linked control horns for precision manoeuvres
  • Latch-type canopy for simplified assembly methods
  • Water-based, environmentally-friendly paint for more vibrant colours
  • 70mm 12-bladed fan provides high power-to-weight ratio

Specifications

  • Wingspan 880mm / 34.6in
  • Overall Length 1060mm / 41.7in
  • Flying Weight Around 1850g
  • Motor Size Inner running Brushless 2860 KV1850
  • ESC 80A
  • Servo 9g x 8
  • Radio 6 Channel
  • CG(centre of gravity) 80-85mm (From Leading Edge)
  • Prop Size 70mm 12-bladed fan
  • Recommended Battery 6S 22.2V 3000mAh 35C Li-Po
  • Battery Connector: XT-60
  • Aileron Yes
  • Elevator Yes
  • RudderYes
  • Flaps Yes
  • Retracts Yes
  • Minimum Age Recommendation 14+
  • Experience Level Intermediate
  • Recommended Environment Outdoor
  • Assembly Time 30 minutes
  • Material Durable EPO
FMS Yak 130 V2 Dimensions

Please Note: This kit requires the following for completion: 2.4 Ghz Radio System, 6S 22.2V 3000mAh 35C Li-Po Battery and Charger.

For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org

 
 

Related Products

FMS 70MM FAN BLADE V2 (12BLADE (YAK/F18)
£12.99
 

Out Of Stock

 
FMS 70MM YAK130 COCKPIT
£26.99
 

In Stock

 
 
FMS 70MM YAK130 COWL
£5.50
 

In Stock

 
 
FMS 70MM YAK130 DECAL SHEET
£10.99
 

In Stock

 
 
FMS 70MM YAK130 FRONT LANDING GEAR SYSTEM - V2 METAL
£49.99
 

In Stock

 
 
FMS 70MM YAK130 FUEL TANKS
£8.25
 

In Stock

 
 
FMS 70MM YAK130 HORIZONTAL STABILIZER
£15.99
 

In Stock

 
 
FMS 70MM YAK130 LANDING GEAR SET
£13.50
 

In Stock

 
 
FMS 70MM YAK130 LINKAGE ROD
£2.75
 

In Stock

 
 
FMS 70MM YAK130 MAIN LANDING GEAR SYSTEM - V2 METAL
£99.99
 

In Stock

 
 
FMS 70MM YAK130 MAIN WING SET
£31.99
 

In Stock

 
 
FMS 70MM YAK130 PIPE
£8.25
 

In Stock

 
 
FMS 70MM YAK130 SCREW SET
£5.50
 

In Stock

 
 
FMS 70MM YAK130 VERTICAL STABILIZER
£13.50
 

In Stock