JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in)
Stock code jpdaa1002Brand JP
Available for same day despatch Mon–Fri if ordered before 2pm, when possible
Fast, precise, snappy, rock-solid in high-g turns and beautifully smooth through graceful aerobatics, nothing quite beats the arrow-like flying qualities of the JPS-3 E2K pylon racer. That’s a recognised fact, for at the 2022 British National E2K Pylon Race Champs, JPS-3 designer and multiple pylon race champion, Paul Bardoe, flew this very design to victory.
Perfect for intermediate to advanced R/C pilots, this is model flying in one of its simplest yet most exciting and satisfying forms. Assemble in a matter of minutes, kit it out with a 1500KV outrunner, APC 8x8 i.c. prop, 80A ESC and 4S 2200mAh LiPo and you’ll just about be ready to punch holes in the sky.
Key Features:
- E2K race approved.
- Laser-cut balsa and ply.
- Pre-applied Oracover scheme.
- Quality hardware throughout.
- Suits 1500KV 4S electric set-ups.
- Pre-built and covered airframe components.
- Locked-in flying characteristics.
- Easy to hand-launch.
- Smooth, fast and bags of fun.
What's in the Box:
- 1x Pre-built and covered fuselage.
- 1x Pre-built and covered 2-piece wing.
- 1x Pre-built and covered tailplane.
- 1x Pre-built and covered fin.
- 1x Quality hardware pack.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1x 4-ch (minimum) Tx and Rx combo.
- 1x Radient 3536 1500KV outrunner.
- 1x ZTW Beatles G2 80A ESC.
- 1x 4S 2200mAh 50C LiPo.
- 3x Radient MS125MG servos.
- 1x APC 8x8" i.c. propeller.
