Skip to main content
  1. Home
  2. More
  3. Electronics
  4. Beier Electronics
  5. Expansion Boards and Switching Modules
  6. LM2596S DC/DC Converter
 

BEIER LM2596S DC/DC Converter

LM2596S DC/DC Converter

In stock

Click to enlarge

BEIER LM2596S DC/DC Converter

Stock code LM2596S

Brand  BEIER

  Good stocks
Available for same day despatch Mon–Fri if ordered before 2pm, when possible
£4.99Each
 
lt;pgt;Beier LM2596S DC/DC Converterlt;/pgt; lt;pgt;Descriptionlt;br /gt;The LM2596S DC/DC converter is a small module that converts a higher input voltage into a lower output voltage. This is a stepdown switching regulator with a high efficiency (up to 90%) and little loss (heat).lt;/pgt; lt;pgt;The input voltage can be in the range of 4 - 37 V. The output voltage can be adjusted between 1.25 - 35 V using a spindle trimmer. However, the voltage at the input (IN) must always be at least 2.0 V higher than the output voltage (OUT).lt;/pgt; lt;pgt;The module has 4 solder terminals for the input and output voltage:lt;br /gt;IN+:lt;br /gt;IN-:    Input voltage pluslt;br /gt;Input voltage minus/GNDlt;br /gt;OUT+:lt;br /gt;OUT-:    Output voltage pluslt;br /gt;Output voltage minus/GNDlt;/pgt; lt;pgt;The LM2596S DC/DC converter has a common ground (GND) at the input and output. The voltages are therefore not galvanically isolated.lt;/pgt; lt;pgt;The output voltage is set to 5.0 V as delivered.lt;/pgt; lt;pgt;Application examples:lt;br /gt;Supply of a sound module if only a higher battery voltage (eg 24 V) is available in the modellt;br /gt;Generation of a BEC voltage from the main batterylt;br /gt;Power supply for microcontrollers (Arduino, Raspberry Pi, ESP32, etc.)lt;br /gt;DIY/self-build electronics projectslt;/pgt; lt;pgt;Technical datalt;br /gt;Input voltage:    4 – 37 V DClt;br /gt;Output voltage:    1.25 – 35 V DClt;br /gt;Output current:    2 A (short-term 3 A)lt;br /gt;Efficiency:    up to 90%lt;br /gt;Protection against:    • Overtemperaturelt;br /gt;• Overcurrentlt;br /gt;• Short circuitlt;br /gt;Dimensions:    43 x 21 x 14 mmlt;br /gt;Weight:    10 glt;/pgt;
 
Back to list
 
Back to list
 

iconMore