EnErG B-25 BEC ESC (25A) (2-4 Cells)
Stock code 4404938Brand EnErG
Out of stock
Currently unavailable - please contact us for an delivery date or an alternative.
£22.99EachCurrently unavailable - please contact us for an delivery date or an alternative.
- Supports high RPM motors,can be used with most of the motors in the rc market
- Secondary sub-menu setting ,is easier to be programmed
- Adjustable BEC output 5.0V/5.5V/6.0V and Continuous 2A current (supplies the Servo with much stronger power)
- Advanced Governor Mode ( has the B-Series ESC to keep the motor speed even though the load is changed)
- More optional motor timing Setup and soft acceleration start ups ( make the motors run smoothly)
- Super smooth and accurate throttle linearity
- Power arming protection (prevents the motor from accidentally running when switched ON)
- Auto throttle shut down in signal lose situation
- Safety thermal over-load protection, when the temperature of ESC exceeds 110 deg C,the ESC will reduce the output power to allow it to cool
- Use new generation of the MOSFET to ensure ESC's heating low,supporting biggest Peak current and higher reliability
- New Advanced programming software
- BEC Output - 5.0V/2A
- Continuous - 25A (Burst - 35A)
- EnErG Pro B-25 BEC
- Lipo Cells - 2-4 (NiMH Cells - 5-12)
- Program Card - 4404970
- Programmable - Yes (Manually or by Program card not included)
- Size - 28x28x8mm
- Weight - 30g
- Output :Continuous Current 25A, Burst Current 35A for 10 seconds
- Battery Cell :5-12NC/2-4Lipo
- Weight :30g
- BEC Output :5V/2A
- Size :28x28x8mm(LxWxH)
