Dynam TOMCAT SKYCLAW 40 AMP ESC FOR 550/650 CLASS MULTI-ROTOR

Supplier stock
Usually dispatches in 1-2 working days.Dynam TOMCAT SKYCLAW 40 AMP ESC FOR 550/650 CLASS MULTI-ROTOR
Stock code SKYCLAW-40ABrand Dynam
Usually dispatches in 1-2 working days
Adopt high-frequency MCU (up to 50MHz) as the main control chip,
the computing speed of the ESC is faster and the response speed of
the throttle is dramatically improved.
Applying the synchronous rectifier technology, it can increase the
ESC efficiency (significantly reduce the ESC temperature), improve
the throttle linearity, and speed up the deceleration response of
the motor.
The ESCs only have one programmable item (Timing), it is very
simple to use. Users can set the program items only on PPM
signal-receiving mode. The Skyclaw series ESCs only have one
programmable item (Timing). Values of Timing: High and Middle. The
default is Middle.
In PPM signal-receiving mode, the frequency of the throttle signal
supported by the ESCs is up to 500Hz and compatible with various
flight controllers.
The twisted-pair design of the throttle signal cable effectively
reduces the crosstalkproduced in signal transmission and makes the
flight more stable. By using specialized power tube to driver the
chip, the ESCs have high efficiency and strong reliability.
Start-up protection: If the motor fails to start within 2 seconds
while pushing the throttle stick upward, the ESC will cut off the
output power. You need to put the throttle stick to the lowest
position again and then restart the motor. It happens in the
following situations: poor connection or disconnection between the
ESC and the motor, the propellers are blocked, etc.
Throttle signal loss protection: If the throttle signal is lost for
over 0.25 second, the ESC will cut off the output immediately to
avoid greater losses caused by the high-speed rotation of the
propeller. The ESC will recover the output immediately after normal
signals are received.
Suitable for 550/650 Class multi-rotors.
Tomcat Skyclaw Features:
- Twisted pair signal wire
- High frequency MCU
- Oneshot125 signal-receiving mode
- Synchronous rectifier technology
- Special drive circuit
Spec Check:
- Cont./Peak Current: 40A
- Burst Current (10s): 60A
- Input:2-6S LiPo
- BEC: No
- Size: 62 x 25 x 8.7
- Weight: 26g
CAUTION: When the Skyclaw series ESCs areapplied to 250 or 300 multi-rotors, 1806 or 2204 size motors and 5 or 6 inches propellers are recommended to use. To avoid overload and burning the ESCs, do not use larger size propellers or motors.