Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!

EasyFit Digital Plug: Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout.

The C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to perform. To Convert a DPR car 1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug. 3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis. Features The EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.Each C8515 EasyFit Digital Plug can be transferred easily from one car to another.There is no need for a soldering iron or modelling expertise. Note C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug.Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006. * Four car and six car powerbases available